Fed Up With Glue Residue & Secondary Lamination for Your Sealed Blister Trays?
2026-11-10
PP‑PE Co‑extruded Sheet: Direct Heat‑Sealing for Thermoformed Blister Trays
One‑step co‑extrusion builds functional layers right into the sheet structure. PP delivers rigidity and excellent thermoformability, while PE serves as the heat‑seal layer. Once thermoformed into blister containers, the tray rim comes with an integral pure‑PE sealing surface. It can be directly heat‑sealed against PE lidding film — no adhesives, high‑frequency welding, or secondary lamination required.
This article breaks down its core strengths and key application considerations for blister packaging.
Defeng — Sheet & Blister Packaging Solutions
![]()
Product At‑a‑Glance
| Item | Specification |
|---|---|
| Sheet Structure | PP substrate layer + PE sealing layer, multi‑layer one‑shot co‑extrusion |
| Sealing Method | Direct heat‑seal with PE lidding film after thermoforming (PE‑PE fusion sealing) |
| Typical Applications | Food blister inserts, medical device trays, protective packaging for industrial components |
| Compatible Equipment | Standard heat‑sealing machine; typical sealing temperature: 110‑140 °C |
| Defeng Available Specs | Thickness: 0.2‑2.0 mm
|
This sheet solves a clear industry pain point. Conventional blister tray sealing relies either on glue bonding or secondary lamination for materials with poor intrinsic heat‑seal performance. With PP‑PE co‑extruded sheet, the sealing layer is integrated during extrusion. Finished blister trays come ready‑to‑seal out of thermoforming.
![]()
Key Advantages
✅ Adhesive‑free sealing Glue‑based sealing raises risks of solvent residue and substance migration — critical concerns for food‑contact and medical‑grade packaging. The co‑extruded PE layer fuses with PE lidding film without introducing extra foreign materials, keeping packaging composition simple and traceable.
✅ Robust, reliable PE‑PE fusion seal Both tray sealing rim and lidding film are polyolefin‑based. Molecules inter‑diffuse and fuse together under heat, rather than merely sticking together. The resulting air‑tight, leak‑proof seal suits contents requiring high seal integrity.
✅ Low production‑line barrier; works with standard heat‑sealers No high‑frequency welder or major line modification is needed. PE offers a broad sealing temperature window starting around 110 °C, with high tolerance for temperature and pressure fluctuation. It delivers consistent mass‑production performance with minimal parameter re‑adjustment between batches.
✅ Recycling‑friendly all‑polyolefin construction Tray (PP+PE) plus PE lidding film belong to the same polyolefin material family. Easier sorting compared to multi‑material hybrid packaging. This brings tangible benefits during end‑customer sustainability audits.
✅ Heat‑resistant & lightweight PP substrate PP maintains long‑term service temperature above 100 °C, performing better than PVC or PS for hot‑fill and high‑temperature scenarios. Its density is ~0.91 g/cm³, roughly 30% lighter than PET (~1.33 g/cm³). Equivalent thickness & footprint brings material‑cost savings.
✅ Fewer process steps via monolithic co‑extrusion Functional layers are formed in a single extrusion run. Thermoformers receive ready‑to‑process sheet for forming and sealing, eliminating secondary lamination. It improves lead‑time control and overall production yield.
Looking for custom‑ratio PP‑PE co‑extruded sheet for your blister project? Contact our technical team for material datasheets and sales service support.
